West Berkshire and North Hampshire

We are a small firm of local plumbers serving our customers in North Hampshire and West Berkshire and are proud to be

In addition to general plumbing work we specialise in oil boiler installations, oil boiler servicing and central heating. Additionally we are certificated to install and service Megaflo and similar un-vented hot water cylinders.

For bathrooms and kitchen installations we offer a full service including tiling, partitioning, small building works and finishing, removing any concerns of having to co-ordinate different trades to complete the job.

Our quotations are presented in spread sheet form, detailing all components and materials therefore making cost analysis and comparisons easy for our clients. All quotations are given without charge.

We operate West of Reading to Hungerford & North of Basingstoke to East Ilsley in the postcode areas: RG7, RG14, RG18, RG19, RG20, RG26 and RG27 including many towns and villages such as Aldermaston, Burghclere, Headley, Highclere, Kingsclere, Newbury and Thatcham.

Click HERE to learn more about our plumbing services

Plumbing

Plumbers are often asked why an oil boiler should be serviced annually. Here are some just some of the reasons:

  1. The filter at the oil tank needs to be cleaned or changed to ensure your boiler receives a good unimpeded flow of clean fuel. Blocked filters result in boiler failure.
  2. The nozzle in the burner delivers vaporised fuel. This component wares and should be changed annually to eliminate wasted fuel being pumped into the boiler.
  3. Inside the boiler the baffle plates take on carbon deposits. These deposits insulate the plates, making heat transfer to the water jacket less efficient. Therefore more fuel is used to heat your radiators and water in the hot water cylinder.
  4. The programmer/controller and valves in the heating system should be checked to ensure they are working correctly.
  5. On completion of the service you receive an OFTEC CD11 service form showing the work carried out. This may be required for a HIPS package to prove boiler efficiency. Additionally a flue gas analyser print out is given confirming the boiler’s CO² emissions are correct.

Why is it important to have your Megaflo or similar un-vented hot water cylinder serviced on an annual basis? For efficiency, safety and reliability:

  1. Many manufacturers guarantee their cylinders for 25 years. This guarantee may not hold if the cylinder is not serviced by a qualified person.
  2. The pressure relief valve and temperature relief valve must be checked.
  3. The expansion baffle must be verified on all Megaflo cylinders or on other un-vented hot water cylinders, the expansion vessel checked.
  4. There is a strainer in the combination (inlet) valve which needs cleaning to remove particulate thus ensuring a free supply of clean water to the cylinder.
  5. The discharge pipe should be checked for blockage.

For more information, free friendly advice or to book a service for your boiler or Megaflo please click HERE

Contact us by telephone or email and we will be pleased to discuss your requirements.

All work is carried out by fully qualified operatives, certificated for all oil installations and servicing. We are also certificated for the installations of Megaflo and similar unvented systems.